🎍 Atem Mini Pro Youtube Streaming Issues

Withthe Mini Pro, we had 3 monitors running through a HDMI Splitter. No problems streaming 1920x1080 30fps. We got the Pro SDI ISO for the dual outputs. We run two monitors ( small older cheap computer monitors) off one output through a splitter and the 3rd monitor off the second output. The 3rd monitor is a newer LG LED 27ML600 RecordDirect to USB Flash Disks with ATEM Mini Pro. The ATEM Mini Pro model also supports direct recording of your streaming data to USB flash disks! That means you get very long recordings in the same H.264 video files with AAC audio that you streamed, so you can direct upload to any online video site, such as YouTube and Vimeo. FREEPricing Estimator Tool for Videographers ️ to build a 6-Figure Livestreaming business ️ http://bit.ly/3Xu3e06My music ️ htt Howto use OBS with ATEM Mini Pro for LivestreamMy GearPortable Live Stream Setup Graphicshttps://motionvfx. Background Church YouTube Streaming system with X32 sound board and ATEM Mini Extreme switcher. MIC1 set to Line, Gain set to 0.00. Audio from Soundboard to MIC1 or MIC2 input had the 60hz hum others experiencing. Inserting a 3.5mm stereo noise isolator between the 3.5mm stereo audio cable and the MIC1 input did the trick. No hum. Todaywe'll talk about what the heck is going on, and what my solution (unfortunately) is. UPDATE: We are going to test two main things (and yes, we found out quickly that the stream ATEMMini Pro Slow Upload Speed. I’m doing some YouTube streaming testing and the upload speed being reported by the Mini Pro is only .2 Mbps. YouTube is also flagging the low speed. Once it climbed to 4.5 Mbps but quickly dropped back. Steaming quality on Mini Pro is set to Highest 9 Mbps setting. The Mini Pro is Wepurchaced atem mini pro, everything is working, except live streaming to youtube from deck (across network). So, we have set up the system, but youtube servers does not recive data. The "ON AIR" button is flashing, after a time te cache fill. The network setting is OK, because i can manage the switcher across network (from notebook) Needhelp? I offer one-on-one Zoom coaching on all the topics I cover on my YouTube channels. Book your first session at https://agency43.youcanbook.meYou 477Share 19K views 3 years ago PORTLAND Tutorial from George Mihaly on how to use the ATEM Mini Pro built-in hardware encoder to live stream to YouTube Live or any RTMP Yesit’s really frustrating, especially that stream/record bug. The (I assume it is a hardware issue) stream engine crashes and the only solution is a power cycle or, as I’ve found out, a firmware update. I try unplugging the modem, unplugging the atem mini pro, the ethernet cable, resetting the MacBook Pro, etc, but it still does not Hithere, I switched my ATEM Mini Pro to 25 fps and the multiview-tv shows corectly 25 fps. But when I stream to youtube I always get 30 fps. I also changed the and added several profiles with lower bandwitdh and 25 fps instead of 30. The lower bandwidth works fine, but the fps in the xml file seems to be ignored. Wut0RA.

atem mini pro youtube streaming issues